The full line
Eleven systems. Every one specified, not sold.
Filter by structure type to see which systems actually apply — or open any product for its full technical profile: mix ratio, cure time, coverage and rated performance.
Every product on this page ships under TERRAMARC, EARTHHRIISE's speciality construction-chemicals brand — one formulation standard and one set of published specs across all eleven systems below.
More about EARTHHRIISE
11 of 11 systems
Acrylic Polymer for Flexible Cementitious Waterproof Coating
TM AR Latex
A modified acrylic polymer that's gauged with cement and water on site to build a flexible, crack-accommodating waterproof coating with high weathering resistance.
Multi-Purpose SBR Co-Polymer
TM SBR Latex
A styrene-butadiene (SBR) co-polymer, gauged with cement on site, used for bonding old concrete to new, crack repair, waterproof slurry coats and polymer-modified repair mortar.
Single Component Acrylic Elastomeric Membrane Waterproof Coating
TM Dancoat
A single-component acrylic elastomeric membrane that builds a thick, UV-resistant flexible film over flat surfaces, terraces and metal roofing — ready to use straight from the pail.
Single Component Polyurethane-based Elastomeric Waterproof Coating
TM PolU-Plug
A single-component, water-based polyurethane dispersion that cures into a seamless, UV- and weather-resistant elastomeric membrane over terraces and roofs.
2 Component Epoxy Coating
TM Eposeal
A water-thinnable, 2-component epoxy coating that provides water and chemical resistance with high mechanical strength — and can be applied directly onto wet surfaces.
Cementitious Crystalline Waterproof Coating
TM Crystabolt
A cement blend with waterproofing inert additives, brush-applied with water, that penetrates pores and capillaries to permanently reduce water permeability from either face of the structure.
2 Component Cementitious Waterproof Coating
TM Cemblock
A cement-based, 2-component membrane coating system rated for both positive and negative water pressure — specified for wet areas, water tanks, terraces, basements and podiums.
Bitumen-based Coating
TM Bitutight
A thixotropic, bitumen-based black emulsion that provides strong adhesion after drying and acts as a barrier against both moisture and vapour.
Crack Filling Paste
TM Riftplug
A ready-to-use crack-filling paste for concrete and masonry — applied to fill cracks before any waterproofing coating or treatment goes on.
Moisture-Curing Pure PU Coating
TM PurePU
A moisture-curing pure polyurethane coating that catalyses into an elastic membrane in itself, at roughly 450% elasticity, with no mesh or overlapping system needed.
Mortar-Based 2 Component Cementitious Coating
TM Tar Cemblock
A heavy-duty, tar-based flexible cementitious coating rated for both positive and negative side hydrostatic pressure — built for underground environments, pools and water bodies.
Still weighing two or three options?
Run the four-question assessment and we'll rank the systems against your structure type, area and age instead of you cross-referencing eleven spec sheets.
Get your recommendation